DESIGNED - MANUFACTURED
ASSEMBLED & PACKAGED
IN THE U.S.A.

the One and Only
     Genuine...

- COMPLETE STEERING / TRACK BAR SYSTEM -

Due to the unknown applications individual components may be applied to and installed in, there are no expressed warranties offered to any of these components when purchased separately from a designated listed kit or system which are fully warranted.

These kits use the pieces included in our individual components and can be purchased separately

For a limited time we have tubing available for select tie rod and drag links and track bar Complete Systems with hardware below...

- NOTE: We do not currently offer any other complete systems or tubing choices. Please see our "Product history" for more information -


Complete 87-98 GM  <or>  97+Ford F-150 & Expedition IFS Steering System with...
    (2) Trail Proof tubing
    (4) Stage-I Rod Ends
    All mounting hardware
    Made to your exact lengths as measure on your truck
    Corrective tubing bends based on your measured angles
         note: These can be used on 99+ GM IFS steering if you make your own "C" adapters or change to a
         pre-99 type centerlink which has a tapered hole in the upper location similar to the lower knuckle hole.

$599.00 with no bends required
(
upgrade to Stage-II for $15/ea)
Length and angular measurements required to manufacture


Single tube (Tie rod, Drag link, Track bar etc. with...
    (1) Race Proof tubing (up to 36" center to center length)
    (2) Stage-I Rod Ends
    All mounting hardware
    Made to your exact lengths as measure on your truck

$499.00 with no bends required - Corrective Bends extra
(
upgrade to Stage-II for $$15/ea)
Length and angular measurements required to manufacture


Single tube (Tie rod, Drag link, Track bar etc. with...
    (1) Rock Proof tubing (up to 35" center to center length)
    (2) Stage-I Rod Ends
    All mounting hardware
    Made to your exact lengths as measure on your truck

$569.00 with no bends required - Corrective Bends extra
(
upgrade to Stage-II for $$15/ea)
Length and angular measurements required to manufacture