|
.
66-86 GM Pickup (check to insure drag link does not interfere with leaf spring packs w/cross-over version)
#TR6686G TIE ROD ONLY 66-86 Chevy & GMC 1/2, 3/4 & 1-ton pickup 4wd $189.00
Trail-Proof Tie Rod Only kit complete with fasteners, hardware, shims, tubing, rod ends and detailed instructions -
Both under or over knuckle option is included with the kit. Can also be ordered as a Cross-over style Drag-Link only application.
#OEMDL6686G DRAG LINK ONLY 66-86 Chevy, GMC 1/2, 3/4 & 1-ton pickup 4wd $179.00
REPLACES OEM STYLE LINK: Trail-Proof Drag Link only kit complete with fasteners, hardware, shims, tubing, rod ends and detailed instructions - Both under or over knuckle option is included with the kit - (For use on OEM style drag links NOTE: available in straight tubes only (no bends) with a limiting factor of 8-10" of total suspension travel based on a 15" long tube. Should be mounted parallel to the ground)
#HSDL6686G DRAG LINK ONLY 66-86 Chevy, GMC 1/2, 3/4 & 1-ton pickup 4wd $189.00
FOR HI-STEER STYLE CONVERSIONS: Trail-Proof Drag Link only kit complete with fasteners, hardware, shims, tubing, rod ends and detailed instructions - Both under or over knuckle option is included with the kit - (For use on converted Cross-Over type drag links.
#RCPT6686G RACE-PROOF TUBING upgrade option for above Tie Rod +$79.00 When ordered with above system
#RKPT6686G ROCK-PROOF TUBING upgrade option for above Tie Rod +$99.00 When ordered with above system
#RCPD6686G RACE-PROOF TUBING upgrade option for above Drag Link +$29.00 When ordered with above system
#RKPD6686G ROCK-PROOF TUBING upgrade option for above Drag Link +$39.00 When ordered with above system
#COS6686G CROSSOVER STEERING SYSTEM 66-86 Chevy, GMC 1/2, 3/4 & 1-t pickup 4wd $369.00
Complete Trail-Proof Tie Rod and drag link system, fasteners, hardware, shims, tubing, rod ends and detailed instructions. For converting your oem design to a cross over system. Does not include hi-steer arms. Must insure straight drag link clears passenger leaf spring.
#TOK6686C TIE ROD OVER KNUCKLE option for above steering system +$15.00 When ordered with above system
Complete Tie Rod over knuckle kit with clearanced separator bushing, F911 bolt and grade-5 slotted nut.
66-91 Blazer/Jimmy/Suburban (check to insure drag link does not interfere with leaf spring packs w/cross-over version)
#TR6691BS TIE ROD ONLY 66-91 Chevy Blazer, GMC Jimmy & Suburban 4wd $189.00
Tie Rod Only kit complete with fasteners, hardware, shims, tubing, rod ends and detailed instructions -
Both under or over knuckle option is included with this kit
#OEMDL6691BS DRAG LINK ONLY 66-91 Chevy Blzr,GMC Jimmy & Suburban 4wd$179.00
REPLACES OEM STYLE LINK: Trail-Proof Drag Link only kit complete with fasteners, hardware, shims, tubing, rod ends and detailed instructions - Both under or over knuckle option is included with the kit - (For use on OEM style drag links NOTE: available in straight tubes only with a limiting factor of 8-10" of total suspension travel based on a 15" long tube.)
#HSDL6691G DRAG LINK ONLY 66-91 Chevy Blzr, GMC Jimmy & Suburban 4wd $189.00
FOR HI-STEER STYLE CONVERSIONS: Trail-Proof Drag Link only kit complete with fasteners, hardware, shims, tubing, rod ends and detailed instructions - Both under or over knuckle option is included with the kit - (For use on converted Cross-Over type drag links.
#RCPT6691BS RACE-PROOF TUBING upgrade option for above Tie Rod +$79.00 When order with above system
#RKPT6691BS ROCK-PROOF TUBING upgrade option for above Tie Rod +$99.00 When order with above system
#RCPD6691BS RACE-PROOF TUBING upgrade option for above Drag Link +$69.00 When order with above system
#RKPD6691BS ROCK-PROOF TUBING upgrade option for above Drag Link +$89.00 When order with above system
#COS6686BS CROSSOVER STEERING SYSTEM 66-91 Chevy & GMC 1/2, 3/4 & 1-ton Blazer, Jimmy & Suburban 4wd $369.00 Complete Trail-Proof Tie Rod and drag link system, fasteners, hardware, shims, tubing, rod ends and detailed instructions. For converting your oem design to a cross over system. Does not include hi-steer arms which you may need depending on vehicle height and configuration, therefore you must insure a straight line drag link will clear passenger leaf spring.
#TOK6686C TIE ROD OVER KNUCKLE option for above steering system +$15.00 When ordered with above system
Complete Tie Rod over knuckle kit with clearanced separator bushing, F911 bolt and grade-5 slotted nut.
87-98 GM PU/SUV (or 99+ with aftermarket lift kit centerlink) (w/ tierods that "bolt sideways" to the upper center cross bar - check to insure tubing will clear components and operating angles are acceptable)
#TR8798G TIE RODS ONLY 87-98 Chevy & GMC 1/2, 3/4 & 1-t PU/SUV IFS 4wd $389.00
Complete Trail-Proof set of two, Tie Rod links, fasteners, hardware, shims, tubing, four upgraded Stage-II Chromemoly Extreme Duty rod ends and detailed instructions
#TR8798GCQ TIE RODS ONLY 87-98 Chevy & GMC 1/2, 3/4 & 1-t pickup IFS 4wd $439.00
(for highly lifted trucks) Includes 1 High-angle Close-Quarters™ bends up to 14-degrees at each knuckle end with upgraded 4 Stage-II Chromemoly rod ends. Complete Trail-Proof set of 2 Tie Rod links, fasteners, hardware, shims, tubing, and detailed instructions
#RCP8798G RACE-PROOF TUBING upgrade option for above Tie Rod +$89.00 When ordered with above system
#RCP8798GCQ RACE-PROOF TUBING upgrade option for above Tie Rod +$149.00 When ordered with above system using the Close-Quarters™ bend option
#RKP8798G ROCK-PROOF TUBING upgrade option for above Tie Rod +$99.00 When ordered with above system (not available when using the Close-Quarters™ bend option)
99-06 GM PU/SUV & Hummer H-2 (w/ tierods that "screw-in" to the ends of the upper center cross bar - check to insure tubing will clear components and operating angles are acceptable)
---------- COMPLETE BOLT-ON KITS ARE FINALLY HERE!!!!! (currently available on a 2 week custom build basis) ----------
* * * * CLICK HERE FOR THE LATEST DETAILS AND PHOTOS! * * * *
#TR9906G TIE ROD KIT 99-06 Chevy/GMC 1/2 to 1-t PU/SUV/H2 IFS 4wd $499.00
Complete Trail-Proof set of two Tie Rod links, upper conversion brackets, fasteners, hardware, shims, tubing, four upgraded Stage-II Chromemoly Extreme duty rod ends and detailed instructions. Fits underneath or on top of the knuckle.
#TR9906GCQ14 TIE ROD KIT 99-06 Chevy/GMC 1/2 to 1-t PU/SUV/H2 IFS 4wd $549.00
(for highly lifted trucks) Includes single High-angle Close-Quarters™ bends up to 14-degrees at each knuckle end with four upgraded Stage-II Chromemoly rod ends. Complete Trail-Proof set of two Tie Rod links, upper conversion brackets, fasteners, hardware, shims, tubing, and detailed instructions
#TR9906GCQ24 up to 24 DEGREE CLOSE QUARTERS BEND option (for severely lifted trucks) Includes all of the above but a much steeper bend on the tie rods for severe-angled tied rods on severely lifted trucks with no other option to prevent joint bind due to excessive angles. upgrade option for above steering system +$49.00 When ordered with above system
#RCP9906G RACE-PROOF TUBING upgrade option for above Tie Rod +$89.00 When ordered with above system
#RCP9906GCQ RACE-PROOF TUBING upgrade option for above Tie Rod +$149.00 When ordered with above system using the Close-Quarters™ bend option
#RKP9906G ROCK-PROOF TUBING upgrade option for above Tie Rod +$99.00 When ordered with above system (not available when using the Close-Quarters™ bend option)
06-09 GM Hummer H-3 (w/ tierods that "screw-in" to the ends of the upper steering rack - check to insure tubing will clear components and operating angles are acceptable - These kits are made on a one on one custom order only basis)
#TR0609H3 TIE ROD KIT 06-09 GM HUMMER H3 IFS 4wd $799.00
Complete Trail-Proof set of two Tie Rod links, upper conversion brackets, fasteners, custom fitted hardware, shims, tubing, four upgraded Stage-II Chromemoly Extreme duty rod ends and detailed instructions. Fits underneath or on top of the knuckle.
#TR0609H3CQ14 TIE ROD KIT 99-06 Chevy/GMC 1/2 to 1-t PU/SUV/H2 IFS 4wd $850.00
(for highly lifted trucks) Includes single High-angle Close-Quarters™ bends up to 14-degrees at each knuckle end with four upgraded Stage-II Chromemoly rod ends. Complete Trail-Proof set of two Tie Rod links, upper conversion brackets, fasteners, hardware, shims, tubing, and detailed instructions
#TR0609H3CQ24 up to 24 DEGREE CLOSE QUARTERS BEND option (for severely lifted trucks) Includes all of the above but a much steeper bend on the tie rods for severe-angled tied rods on severely lifted trucks with no other option to prevent joint bind due to excessive angles. upgrade option for above steering system +$49.00 When ordered with above system
#RCP0609H3 RACE-PROOF TUBING upgrade option for above Tie Rod +$89.00 When ordered with above system
#RCP0609H3CQ RACE-PROOF TUBING upgrade option for above Tie Rod +$149.00 When ordered with above system using the Close-Quarters™ bend option
#RKP0609H3 ROCK-PROOF TUBING upgrade option for above Tie Rod +$99.00 When ordered with above system (not available when using the Close-Quarters™ bend option)
* * * * * *
Custom Applications
Add $20 to any of the above pricing for cross over Tie Rod and drag links that mounts separately.
Add $45 to any of the above pricing for any non-listed or custom designed system.
Add $25 to any single bend each you need to add or change in your track bar or steering tubing (Trail)
Add $45 to any single bend each you need to add or change in your track bar or steering tubing (Race)
Add $179 to any of the above pricing to add a DOUBLE Tie Rod when using a Tie rod Over Knuckle Kit
then add the appropriate "upgrade cost" for larger tubing sizes for that rod.
Special Added Options
Add $89 per angle (trailproof) for a Close Quarters Bend in the drag link tubing to normalize rod end
misalignment on extreme angle applications. Please specify specific angle required.
Requires upgrade to Stage-II Extreme Duty™ rod ends for maximum strength
Add $129 per angle (raceproof or rock proof) for a Close Quarters Bend (as described above)
Requires upgrade to Stage-II Extreme Duty™ rod ends for maximum strength
Add $15 per Rod End to any of the above to upgrade to the Stage-2 Extreme Duty Rod Ends.
Add $25 to any single tube you would like powder coated to your specific color (not painted).
Black Purple-sparkle White Mirror Black Red Blue Black-krinkle
Add $49 to any single tube you would like "Chrome-coat" powder coated. The look of chrome with
the durability of powder coat. Includes special polishing of the tube prior to the
"Chrome-coat" application
Add $35 to any pitman or steering arm "Chrome-coat" powder coated. The look of chrome with
the durability of powder coat.
- all prices based on payment sent in via bank cashiers check - additional handling and freight charges may also apply -
The purchaser is solely responsible for all correct measurements, clearance, fitment and feasibility considerations. There are no returns on incorrectly provided specifications or measurements. Replacement costs are the sole responsibility of the purchaser.
|
|
