BULLET PROOF ROD ENDS™

-  LIFETIME REPLACEMENT WARRANTY on breakage of our Stage-II Steering Rod Ends*
-  LIMITED LIFETIME REPLACEMENT WARRANTY on wear, tear & even abuse of Stage-II's!**
-  1 YEAR REPLACEMENT WARRANTY against manufacturer defects of our Stage-I Rod Ends
-  Not just any off-the shelf rod end! MADE TO OUR SPECS JUST FOR THIS APPLICATION     
-  TIGHTEST SPHERICAL ROD ENDS IN THE INDUSTRY
-  Up to 5 TIMES TIGHTER than most other cheaper AND more expensive "Heim" joints
-  Up to 10 TIMES TIGHTER than most OEM tie rod ends
-  Work absolutely excellent in the deepest Mud, Sand, Snow, Water, Dirt, Rocks and Woods.   
-  NO GREASE needed
-  NO MAINTENANCE required
-  NO EXTERNAL SEALS to maintain or wear out, tear or fail
-  NO NOISE completely silent, rattle free operation
-  Average 10 YEAR LIFE expectancy
-  Each one INDIVIDUALLY HAND CHECKED, TESTED AND INSPECTED before assembly
-  Increased DURABILITY AND RELIABILITY
-  OUTLASTS STANDARD OEM BALL & SOCKET ENDS up to 3 times longer
-  STRONGER MATERIAL than typical mild steel, mass produced OEM tie rod ends
-  Tested at an average of  4 TIMES STRONGER than the average OEM tie rod ends
-  Compact design at only 7/8" radius, 13% MORE COMPACT than other h.d. OEM ends
-  OVER 14 YEARS OF PROVEN PERFORMANCE and Reliability in the field and on the track
-  EASILY REMOVED No banging and pounding to remove from the knuckles or pitman arm
-  42 DEGREE overall articulation results in 30" of travel using an average 41" long drag link. 

BULLET PROOF TUBING™

-  LIFETIME REPLACEMENT WARRANTY on breakage or failure of our tubing*
-  MADE BY HAND, one at a time and each one individually inspected from start to finish
-  Each tube fully assembled to GUARANTEE FIT, FINISH & QUALITY before shipment
-  Tested at an average of 3 TIMES STRONGER than OEM tie rods
-  Meticulously fully MACHINED AND MILLED to exacting tolerances
-  NO WELDS TO FAIL or heat to DECREASE TUBING STRENGTH
-  ONE PIECE TUBING with no inserts, bushings, sleeves or adaptors… ROCK SOLID!
-  NO COUPLERS TO FAIL where OEM adjuster sleeves connecting two tie rod halves together
    would be first to bend upon impact
-  NO NEED TO REMOVE Knuckle or Pitman to modify for installation.
-  NO SPECIAL TOOLS NEEDED   -   NO EXPENSIVE REAMERS REQUIRED
-  Can be INSTALLED IN LESS THAN 45 MINUTES with detailed & easy to follow illustrations
-  LESS DRAG LINK ANGLE  to reduce BUMP STEER on highly lifted vehicles
-  LESS ROD END JOINT ANGLE for INCREASED ARTICULATION and travel
-  TIE ROD can also  be mounted ON TOP OF KNUCKLES for even less joint angles and to
    protect from terrain obstacle impacts (optional)
-  FLEXIBLE-Will withstand impacts and REBOUND BACK from up to a 4" HIT***
-  Optional SUPER HEAVY DUTY TUBING for the severest of situations, available
-  CUSTOM DESIGNED to your particular vehicle specs and application
-  Standard 3/4-16 thread ACCEPTS ANY TYPICAL SPHERICAL ROD END if needed
-  SHOT PEENED AND HAND POLISHED to meet stress relief requirements for maximum flex.
-  Beautifully show finished in HARDCOAT POLYURETHANE
-  FULLY USER ADJUSTABLE without having to remove anything or loosen any bolts
-  Tested and survived FOURWHEELER MAGAZINE's TOP TRUCK CHALLENGE. After 10
    years of trail usage, inspection upon removal proved them to still be readily capable for more!

BULLET PROOF HARDWARE™

-  LIFETIME REPLACEMENT WARRANTY on breakage or failure of any piece of hardware*
-  We include one of the STRONGEST BOLTS IN THE WORLD in every kit we sell (F911's)
-  All of our installation hardware is DESIGNED AND MACHINED IN HOUSE  by us
-  Special patented ROD END RETAINER CAPS keep rod end engaged to the steering system
   even in the event of total bearing failure.

CUSTOMER SUPPORT

-  FULL UNLIMITED CUSTOMER SUPPORT 7 days a week for as long as you own your system
-  CUSTOM APPLICATIONS WELCOMED! We will look into any option you might require

    *  Warranty applied due to manufacturer or material defects for the life of the product to the original owner
  **  For a minimal handling and return fee, is guaranteed for life time replacement upon receipt of damaged
        component. Warranty is honored regardless of age, use or conditions for the life of the product to the original owner
***  Tested with a 50" tie rod length bar and measured in the center with a bend-test fixture